2005 Mercedes A Class

Brake disc worn, pitted or scored, but not seriously weakened Both OSR NSR (1.1.14 (a) (ii))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Fuel Pipe/s corroded ()

Seat belt buckle slightly damaged All rear cover missing (7.1.2 (d))

Tyre worn close to legal limit/worn on edge Both OSR NSR (5.2.3 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Brake disc worn, pitted or scored, but not seriously weakened Both OSR NSR (1.1.14 (a) (ii))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Fuel Pipe/s corroded ()

Headlamp aim too low Both NSF OSF (4.1.2 (a))

Seat belt buckle slightly damaged All rear cover missing (7.1.2 (d))

Tyre worn close to legal limit/worn on edge Both OSR NSR (5.2.3 (e))

Fuel filler pipes corroded

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Tyre slightly damaged/cracking or perishing Both rear (5.2.3 (d) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Fuel filler pipes corroded

Offside Outer Drive shaft joint constant velocity boot severely deteriorated Squashed, premature failure likely (6.1.7 (g) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Tyre slightly damaged/cracking or perishing Both rear (5.2.3 (d) (ii))

Offside Rear Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen both (3.5 (a))

Brake disc worn, pitted or scored, but not seriously weakened All (1.1.14 (a) (ii))

Offside Rear Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge wearing out of shape on inner edge (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge 1.66mm worn outer edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 2.6mm wearing on outer edge (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

cover missing o/s/r seat belt catch.

Child seat fitted not allowing full inspection of adult belt

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

nearside front tyre perished

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)