MOT Status
ValidMileage
244,404 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake disc worn, but not excessively all (1.1.14 (a) (i))
Front Headlamp lens slightly defective both (4.1.1 (b) (i))
Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced both sills (6.1.1 (c) (i))
Front Lower Suspension arm ball joint has slight play both sides (5.3.4 (a) (i))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Obligatory mirror slightly damaged both sides cases (3.3 (b) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Shock absorbers has a reduced damping effect both (5.3.2 (d))
Brake disc worn, but not excessively all (1.1.14 (a) (i))
Front Headlamp lens slightly defective both (4.1.1 (b) (i))
Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced both sills (6.1.1 (c) (i))
Front Lower Suspension arm ball joint has slight play both sides (5.3.4 (a) (i))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Obligatory mirror slightly damaged both sides cases (3.3 (b) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Shock absorbers has a reduced damping effect both (5.3.2 (d))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Headlamp lens slightly defective both worn (4.1.1 (b) (i))
Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced both sills (6.1.1 (c) (i))
Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill's (6.1.1 (c) (i))
Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive subframe area (5.3.6 (a) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive subframe area (5.3.6 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive subframe area (5.3.6 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive subframe area (5.3.6 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Rear discs heavily rusted across contact area
Hand brake on minimum pass 16%
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Hand brake on minimum pass 16%
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))
Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Emissions not tested rear exhaust in two halfs (8.2.2.2 (e))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Rear Exhaust has a major leak of exhaust gases in two halfs (6.1.2 (a))
Rear Exhaust system insecure (6.1.2 (a))
Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))
Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Nearside Steering rack gaiter deteriorated (2.2.D.2d)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear tyre low on air
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Headlamp aim too high (1.8)
Offside Steering rack gaiter split (2.2.D.2d)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Steering rack gaiter deteriorated (2.2.D.2d)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear tyre low on air
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Exhaust emits excessive smoke or vapour of any colour (7.4.B.4)
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Parking brake: efficiency below requirements (3.7.B.7)
Parking brake lever has little reserve travel (3.1.6b)
2 front tyres have wear on inner tread. 2 rack gaitors twisted.
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Mercedes-benz Viano?
Based on 134,814 MOT tests across 8,421 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL06 VYR is a 2006 Mercedes-benz Viano in Silver with a 2,148cc diesel engine. This vehicle has been through 28 MOT tests with a personal pass rate of 67.9%.
Across all 2006 Mercedes-benz Viano models, the average MOT pass rate is 74.5% with a typical mileage of 108,362 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Viano fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 2,410 recorded failures. If you're considering buying BL06 VYR, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Viano typically stays on UK roads for around 22 years. At 20 years old, this Mercedes-benz Viano is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BL06 VYR?
You can check the full history of BL06 VYR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL06 VYR registered?
BL06 VYR is a 2006 Mercedes-benz Viano, first registered on 3 July 2006.
Is BL06 VYR safe to buy?
The MOT history for BL06 VYR shows 28 tests with a 67.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL06 VYR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL06 VYR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.