MOT Status
ValidMileage
99,242 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
general corrosion underneath
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear most (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear most (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Rear Exhaust has a major leak of exhaust gases box (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear most (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear most (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill area (5.3.6 (a) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Registration plate inscription illegible (0.1 (b))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Brake master cylinder leaking clutch pipe area (1.1.10 (b) (ii)) DANGEROUS
Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear most bush (5.3.4 (a) (i))
Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear most bush (5.3.4 (a) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Valve stem slightly damaged (5.2.3 (j))
Offside Headlamp aim too high and too far to the right. (4.1.2 (a))
Nearside Rear Valve stem seriously damaged (5.2.3 (j)) DANGEROUS
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear most bush (5.3.4 (a) (i))
Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear most bush (5.3.4 (a) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Valve stem slightly damaged (5.2.3 (j))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Nearside and offside, rear bush (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
nearside rear tyre is wearing on edges
some slight wear and discolouration to both front and rear brake discs
Offside Headlamp aim too high (1.8)
nearside rear tyre is wearing on edges
some slight wear and discolouration to both front and rear brake discs
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 5?
Based on 413,409 MOT tests across 26,269 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL10 LLC is a 2010 Mazda 5 in Silver with a 1,798cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 60.9%.
Across all 2010 Mazda 5 models, the average MOT pass rate is 70.8% with a typical mileage of 69,586 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 5 fails its MOT is shock absorber has a serious fluid leak, accounting for 13,334 recorded failures. If you're considering buying BL10 LLC, it's worth having these areas checked by a mechanic before committing.
The Mazda 5 typically stays on UK roads for around 21 years. At 16 years old, this Mazda 5 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BL10 LLC?
You can check the full history of BL10 LLC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL10 LLC registered?
BL10 LLC is a 2010 Mazda 5, first registered on 28 July 2010.
Is BL10 LLC safe to buy?
The MOT history for BL10 LLC shows 23 tests with a 60.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL10 LLC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL10 LLC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.