MOT Status
ExpiredMileage
124,566 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Brake pipe slightly corroded before flexi (3.6.B.2c)
front brake imbalance
Indicator switch faulty (1.4.A.1)
Nearside Front Suspension arm has excessive play in a pin/bush rear bush (2.4.G.2)
Nearside Rear Direction indicator incorrect colour (1.4.A.2f)
Nearside Rear Brake pipe slightly corroded before flexi (3.6.B.2c)
both front tyres worn on edges (border pass)
front brake imbalance
corrosion present on load sensing valve
corrosion present on rear brake pipe ferrules
front brake pads worn thin
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)
Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)
Brake load sensing valve stiff (3.6.E.3)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Brake load sensing valve linkage stiff (3.6.E.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
nearside rear lens has water in it
Brake load sensing valve linkage seized (3.6.E.3)
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
nearside rear lens has water in it
Spare tyre defective
Offside Rear Registration plate lamp not working (1.1.5c)
Nearside Front coil spring fractured (2.4.C.1a) DANGEROUS
Spare tyre defective
nearside front tyre worn on outer edge
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL51 ZWV is a 2002 Peugeot 206 in Red with a 1,868cc diesel engine. This vehicle has been through 16 MOT tests with a personal pass rate of 68.8%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BL51 ZWV, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BL51 ZWV?
You can check the full history of BL51 ZWV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL51 ZWV registered?
BL51 ZWV is a 2002 Peugeot 206, first registered on 14 January 2002.
Is BL51 ZWV safe to buy?
The MOT history for BL51 ZWV shows 16 tests with a 68.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL51 ZWV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL51 ZWV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.