MOT Status
ExpiredMileage
102,957 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Rear tyre has a distort
Offside Side repeater slightly discoloured (1.4.A.2f)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Nearside Side repeater incorrect colour (1.4.A.2f)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Offside Rear tyre has a distort
Offside Side repeater slightly discoloured (1.4.A.2f)
Nearside Rear tyre perishing
Nearside Side repeater slightly discoloured (1.4.A.2f)
Offside Side repeater slightly discoloured (1.4.A.2f)
oil leak
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Front wheel bearing rough when rotated (2.5.A.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Brake valve leaking load valve (3.6.A.1) DANGEROUS
oil leak
Brake load sensing valve stiff (3.6.E.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Brake load sensing valve stiff (3.6.E.3)
Brake load sensing valve stiff (3.6.E.3)
Parking brake lever has little reserve travel (3.1.6b)
n/s/r tyre has cuts in edge of tyre
Exhaust has a major leak of exhaust gases (7.1.2)
Coolant leak
Brake load sensing valve linkage seized (3.6.E.3)
Indicator switch faulty (1.4.A.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Coolant leak
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL52 EPO is a 2003 Peugeot 206 in Blue with a 1,360cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 68.8%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This vehicle is performing in line with others of the same year.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BL52 EPO, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BL52 EPO?
You can check the full history of BL52 EPO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL52 EPO registered?
BL52 EPO is a 2003 Peugeot 206, first registered on 22 January 2003.
Is BL52 EPO safe to buy?
The MOT history for BL52 EPO shows 16 tests with a 68.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL52 EPO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL52 EPO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.