MOT Status
ExpiredMileage
1,606 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Windscreen wiper does not clear the windscreen effectively both (8.2.2)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner arch (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i) DANGEROUS
Nearside Front coil spring broken (2.4.C.1a) DANGEROUS
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i) DANGEROUS
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside rear brake recording little or no effort (3.7.B.5a)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both front disc corroded
o/s/r tyre deteriorated
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Steering locking device missing (2.2.C.1g)
Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
both rear tyres have slight cracking
o/s/f inner drive shaft gaitor leaking slightly
Nearside Rear coil spring fractured (2.4.C.1a)
Offside Rear coil spring fractured (2.4.C.1a)
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
both rear tyres have slight cracking
o/s/f inner drive shaft gaitor leaking slightly
Nearside Rear wheel bearing rough when rotated (2.6.1)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
clutch fluid leak from feed pipe to master cylinder
Offside Front front brake binding (3.7.B.1)
Offside Rear rear brake application uneven (3.7.B.2)
Brake pedal spongy (3.3.B.1b) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Fluid lead from clutch feed pipe to master cylinder
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
long handbrake travel
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL52 VXT is a 2003 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 58.8%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BL52 VXT, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BL52 VXT?
You can check the full history of BL52 VXT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL52 VXT registered?
BL52 VXT is a 2003 Ford Ka, first registered on 31 January 2003.
Is BL52 VXT safe to buy?
The MOT history for BL52 VXT shows 17 tests with a 58.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL52 VXT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL52 VXT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.