2005 Volkswagen Golf

Manufactures engine and body covers fitted restricting full inspection

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

rear sub frame corroded

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

under-trays fitted obscuring some underside components

Front Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

under-trays fitted obscuring some underside components

Electronic stability control warning lamp indicates a fault (7.12 (e))

Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Brake hose slightly deteriorated all (1.1.12 (b) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside sill corroded

Offside sill corroded

manufacturers guard fitted to underside

under side corroded

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

engine management light on at time of test

traction control light on at time of test

undertrays fitted obscuring some parts

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Under-trays fitted obscuring some underside components

traction control light on

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

air bag light on

traction control light on

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Inner Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

air bag light on

traction control light on

Under-trays fitted obscuring some underside components

air bag light on

traction control light on

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Under-trays fitted obscuring some underside components

air bag light on

traction control light on

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front registration plate deteriorated (6.3.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear registration plate deteriorated (6.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)