MOT Status
ExpiredMileage
46,617 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Vehicle structure is corroded but structural rigidity is not significantly reduced front and rear and inner and outer sills (6.1.1 (c) (i))
Headlamp aim too low (4.1.2 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Vehicle structure is corroded but structural rigidity is not significantly reduced front and rear and inner and outer sills (6.1.1 (c) (i))
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill/ floor (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit inner shoulder worn very low (4.1.E.1)
Nearside Rear inner arch slightly corroded
O/S/F Subframe corroded
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill/ skirt (2.4.A.3)
Offside Rear Tyre worn close to the legal limit inner shoulder worn very low (4.1.E.1)
Offside Rear inner arch slightly corroded
underside of vehicle has surface rust
Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
O/S/F Subframe corroded
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill/ floor (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit inner shoulder worn very low (4.1.E.1)
Nearside Rear inner arch slightly corroded
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill/ skirt (2.4.A.3)
Offside Rear Tyre worn close to the legal limit inner shoulder worn very low (4.1.E.1)
Offside Rear inner arch slightly corroded
underside of vehicle has surface rust
N/S/R Tyre worn to 1.6mm
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
O/S/R Tyre worn to 1.6mm
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
underside of vehicle has slight surface rust
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement wishbone (2.4.G.2)
Offside Rear coil spring broken (2.4.C.1a)
N/S/R Tyre worn to 1.6mm
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
O/S/R Tyre worn to 1.6mm
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
underside of vehicle has slight surface rust
Engine covers fitted obscuring some components in the engine bay
Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Vehicle structure has slight corrosion (6.1.A.1)
Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Vehicle structure has slight corrosion (6.1.A.1)
offside sill to floor repair heavily undersealed
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Engine covers fitted obscuring some components in the engine bay
Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Vehicle structure has slight corrosion (6.1.A.1)
Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Vehicle structure has slight corrosion (6.1.A.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Vehicle structure has slight corrosion (6.1.A.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Vehicle structure has slight corrosion (6.1.A.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Vehicle structure has slight corrosion (6.1.A.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Vehicle structure has slight corrosion (6.1.A.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
nearside/offside front tyres wearing on inner edges
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Vehicle structure has slight corrosion (6.1.A.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
nearside/offside front tyres wearing on inner edges
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp aim too low (1.8)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp aim too low (1.8)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front registration plate character(s) not correctly formed (6.3.4b)
Rear registration plate character(s) not correctly formed (6.3.4b)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL55 NVP is a 2006 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 57.9%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BL55 NVP, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BL55 NVP?
You can check the full history of BL55 NVP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL55 NVP registered?
BL55 NVP is a 2006 Ford Ka, first registered on 28 January 2006.
Is BL55 NVP safe to buy?
The MOT history for BL55 NVP shows 19 tests with a 57.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL55 NVP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL55 NVP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.