MOT Status
ValidMileage
159,101 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Hydraulic leak, but not excessive power steering pipe (8.4.1 (a) (i))
Front suspension corroded
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Play in steering rack inner joint(s) ()
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge 195 65 r15 (5.2.3 (e))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear heat shield lose
Rear suspension corroded
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) DANGEROUS
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) DANGEROUS
Front Hydraulic leak, but not excessive power steering pipe (8.4.1 (a) (i))
Front suspension corroded
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Play in steering rack inner joint(s) ()
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge 195 65 r15 (5.2.3 (e))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear heat shield lose
Rear suspension corroded
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
underbody has heavy surface corrosion
underbody suspension components have heavy surface corrosion
Nearside Front Road wheel fixing loose (5.2.1 (a) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Windscreen washer not working (3.5 (a))
underbody has heavy surface corrosion
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
underbody suspension components have heavy surface corrosion
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
underbody suspension components have surface corrosion
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Headlamp aim too high (4.1.2 (a))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
underbody suspension components have surface corrosion
Front subframe heavily corroded.
Rear axle heavily corroded.
Emissions not tested (8.2.1.2 (d))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a))
Exhaust system insecure (6.1.2 (a))
Nearside Headlamp aim not tested (4.1.2 (b))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Headlamp aim too high (4.1.2 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Front subframe heavily corroded.
Rear axle heavily corroded.
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear suspension components corroded
Sill covers fitted obscuring outer sills
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Underbody corroded structural rigidity is not significantly reduced
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Underbody corroded structural rigidity is not significantly reduced
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
underbody corroded
Front Service brake excessively fluctuating (1.2.1 (e))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
underbody corroded
Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Exhaust mounting defective (6.1.2 (a))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Disc pads Pitted
Rear Reg Plate Cracked
Front Disc pads Pitted
Offside Front Front position lamp(s) not working (1.1.A.3b)
Rear Reg Plate Cracked
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside rear brake fluctuating, but not excessively (3.7.B.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside rear brake fluctuating, but not excessively (3.7.B.3)
Rear Exhaust system not adequately supported (7.1.1)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear reflector excessively damaged so that its function is impaired (1.5.1c)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Wheel nut(s) missing (4.2.A.1e)
Nail in nearside rear tyre
Nail in offside rear tyre
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Rear Registration plate lamp not working (1.1.5c)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BL56 CNA is a 2007 Mazda 3 in Grey with a 1,598cc petrol engine. This vehicle has been through 29 MOT tests with a personal pass rate of 58.6%.
Across all 2007 Mazda 3 models, the average MOT pass rate is 74.7% with a typical mileage of 68,986 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying BL56 CNA, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 19 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BL56 CNA?
You can check the full history of BL56 CNA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BL56 CNA registered?
BL56 CNA is a 2007 Mazda 3, first registered on 31 January 2007.
Is BL56 CNA safe to buy?
The MOT history for BL56 CNA shows 29 tests with a 58.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BL56 CNA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BL56 CNA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.