2008 Audi A6

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output remnants of glue from beam benders (4.1.4 (b))

Nearside Front Lower Suspension arm ball joint has slight play front arm (5.3.4 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement front arm (5.3.4 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement rear arm (5.3.4 (a) (i))

Nearside Front dip beam poor image

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear exhaust heatsheild loose

Offside Front Headlamp has a product on the lens but not seriously reducing light output remnants of glue from beam benders (4.1.4 (b))

Offside Front Lower Suspension arm ball joint has slight play front arm (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement front arm (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement rear arm (5.3.4 (a) (i))

Offside Front dip beam poor image

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Towball/hitch not fitted at time of test ()

towing electrics not compatible with MOT LED tester advise to have electrics tested

Nearside Front Headlamp has a product on the lens but not seriously reducing light output remnants of glue from beam benders (4.1.4 (b))

Nearside Front Headlamp reflector slightly defective dip beam effecting the beam pattern (4.1.1 (b) (i))

Nearside Front Lower Suspension arm ball joint has slight play front arm (5.3.4 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement both arms bushes slightly deteriorated (5.3.4 (a) (i))

Nearside Rear exhaust heat shield loose

Offside Front Headlamp has a product on the lens but not seriously reducing light output remnants of glue from beam benders (4.1.4 (b))

Offside Front Lower Suspension arm ball joint has slight play front arm (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement both arms bushes slightly deteriorated (5.3.4 (a) (i))

Towball/hitch not fitted at time of test ()

towing electrics not compatible with MOT LED tester advise to have electrics tested

Offside Rear Seat belt buckle missing (7.1.2 (d))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output remnants of glue from beam benders (4.1.4 (b))

Nearside Front Headlamp reflector slightly defective dip beam effecting the beam pattern (4.1.1 (b) (i))

Nearside Front Lower Suspension arm ball joint has slight play front arm (5.3.4 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement both arms bushes slightly deteriorated (5.3.4 (a) (i))

Nearside Rear exhaust heat shield loose

Offside Front Headlamp has a product on the lens but not seriously reducing light output remnants of glue from beam benders (4.1.4 (b))

Offside Front Lower Suspension arm ball joint has slight play front arm (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement both arms bushes slightly deteriorated (5.3.4 (a) (i))

Towball/hitch not fitted at time of test ()

towing electrics not compatible with MOT LED tester advise to have electrics tested

front top suspension are rubber bushes worn

Items removed from driver's view prior to test ()

Nearside Front Headlamp has a product on the light source but not seriously reducing light output euro beam benders (1.7.5a)

Nearside Front Lower Suspension arm has slight play in a ball joint front arm (2.4.G.2)

Nearside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement rear arm (2.4.G.2)

Nearside Front Upper Suspension arm synthetic bush deteriorated but not resulting in excessive movement front arm (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit worn on inner edge of tread 245/40/18 97Y (4.1.E.1)

Nearside Rear exhaust heat shield loose

Offside Front Headlamp has a product on the light source but not seriously reducing light output euro beam benders (1.7.5a)

Offside Front Lower Suspension arm has slight play in a ball joint front arm (2.4.G.2)

Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement front arm (2.4.G.2)

Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement rear arm (2.4.G.2)

Offside Rear Tyre worn close to the legal limit worn on inner edge of tread 245/40/18 97Y (4.1.E.1)

Towball/hitch not fitted at time of test ()

factory covers fitted obscuring testable items

towing electrics not compatible with our tester advise checking

Nearside Rear coil spring broken (2.4.C.1a)

Offside Rear coil spring broken (2.4.C.1a)

Items removed from driver's view prior to test ()

Nearside Front Headlamp has a product on the lens but not seriously reducing light output euro beam benders (1.7.5a)

Nearside Front Lower Suspension arm has slight play in a ball joint front arm (2.4.G.2)

Nearside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement front arm (2.4.G.2)

Nearside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement rear arm (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit worn on inner edge of tread 245/40/18 97Y (4.1.E.1)

Nearside Rear exhaust heat shield loose

Offside Front Headlamp has a product on the lens but not seriously reducing light output euro beam benders (1.7.5a)

Offside Front Lower Suspension arm has slight play in a ball joint front arm (2.4.G.2)

Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement front arm (2.4.G.2)

Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement rear arm (2.4.G.2)

Offside Rear Tyre worn close to the legal limit worn on inner edge of tread 245/40/18 97Y (4.1.E.1)

Towball/hitch not fitted at time of test ()

factory covers fitted obscuring testable items

towing electrics not compatible with our tester advise checking

warning light indicates a fault in the traction control systems

engine covers fitted

exhaust heat shield insecure

under-trays fitted

engine management light on

Engine covers fitted obscuring some components in the engine bay

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

Child seat fitted not allowing full inspection of adult belt

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Child seat fitted not allowing full inspection of adult belt

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

Under-trays fitted obscuring some underside components