MOT Status
ExpiredMileage
100,321 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Track rod end seriously misaligned (2.1.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside rear brake recording little or no effort (3.7.B.5a)
Offside Front coil spring broken (2.4.C.1a)
Offside Side repeater incorrect colour (1.4.A.2f)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside rear brake recording little or no effort (3.7.B.5a)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brake load sensing valve stiff (3.6.E.3)
Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front coil spring corroded (2.4.C.1b)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Play in steering rack inner joint(s)
Brake load sensing valve seized (3.6.E.3)
Brakes imbalanced across an axle (3.7.B.5b)
Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Brake load sensing valve linkage seized (3.6.E.3)
Exhaust system not adequately supported (7.1.1)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Stop lamp not working (1.2.1b)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside rear brake recording little or no effort (3.7.B.5a)
Rear rear brake application uneven (3.7.B.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front coil spring corroded (2.4.C.1b)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
n/s/r tyre has cracks
o/s/r tyre has cracks
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Brake load sensing valve linkage seized (3.6.E.3)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Registration plate lamp not working (1.1.5c)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Centre Exhaust has part of the system excessively deteriorated (7.1.1a)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Brake hose twisted (3.6.B.4c)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN02 LSU is a 2002 Peugeot 206 in Silver with a 1,360cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 63%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BN02 LSU, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BN02 LSU?
You can check the full history of BN02 LSU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN02 LSU registered?
BN02 LSU is a 2002 Peugeot 206, first registered on 5 April 2002.
Is BN02 LSU safe to buy?
The MOT history for BN02 LSU shows 27 tests with a 63% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN02 LSU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN02 LSU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.