MOT Status
ExpiredMileage
156,579 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Rear Brake pipe corroded, covered in grease or other material Both (1.1.11 (c))
Suspension component mounting prescribed area is corroded but not considered excessive Both outer sill (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill in several places (7.1.1 (a) (i))
Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))
Nearside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill front and rear (7.1.1 (a) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))
Driver's seat insecure (6.2.5 (a) (ii)) DANGEROUS
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
o/s/f strut top stiff
Nearside Rear Radius arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Under seal on all welding
Front position lamp(s) not working both (1.1.A.3b)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Rear fog lamp not working (1.3.2b)
Rear fog lamp switch faulty (1.3.1a)
Registration plate lamp not working (1.1.C.1d)
engine mounting deteriorated resulting in excessive movement (6.1.D.1a)
Nearside Rear Radius arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
o/s/f strut top stiff
Nearside Registration plate lamp not working (1.1.C.1d)
nail in n/s/r tyre
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
rear silencer deteriorated
n/s and o/s anti roll bar links slight play
n/s/r tyre wearing on edges
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Stop lamp adversely affected by the operation of another lamp (1.2.1f)
Registration plate lamp not working (1.1.C.1d)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nail in offside rear tyre
Offside Front Front position lamp(s) not working (1.1.A.3b)
Nail in offside rear tyre
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nail in offside rear tyre
Nearside Front brake disc slightly pitted (3.5.1h)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Stop lamp not working (1.2.1b)
Rear registration plate deteriorated (6.3.1d)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
advise n/s/f tyre slight side wall cracking
advise n/s/r tyre slight side wall cracking
advise o/s/r brakes effort low
advise o/s/r tyre slight side wall cracking
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN02 UBG is a 2002 Peugeot 206 in Black with a 1,997cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 59.3%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BN02 UBG, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BN02 UBG?
You can check the full history of BN02 UBG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN02 UBG registered?
BN02 UBG is a 2002 Peugeot 206, first registered on 7 March 2002.
Is BN02 UBG safe to buy?
The MOT history for BN02 UBG shows 27 tests with a 59.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN02 UBG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN02 UBG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.