MOT Status
ExpiredMileage
163,797 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Rear wheel bearing rough when rotated (2.6.1)
Front brake pads low
oil leak
Engine covers fitted obscuring some components in the engine bay
Front Brake pad(s) wearing thin (3.5.1g)
Oil leak
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Under-trays fitted obscuring some underside components
brake compensator valve shows signs of weaping but not at time of test
Exhaust system not adequately supported (7.1.1)
Front registration plate deteriorated (6.3.1d)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2) DANGEROUS
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS
Engine covers fitted obscuring some components in the engine bay
Front Brake pad(s) wearing thin (3.5.1g)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Oil leak
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Under-trays fitted obscuring some underside components
brake compensator valve shows signs of weaping but not at time of test
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear fog lamp not working (1.3.2b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Stop lamp not working (1.2.1b)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Stop lamp not working (1.2.1b)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Registration plate lamp not working (1.1.C.1d)
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Stop lamp not working (1.2.1b)
Nearside Stop lamp not working (1.2.1b)
Brake load sensing valve linkage seized (3.6.E.3)
Brake valve leaking (3.6.A.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Stop lamp not working (1.2.1b)
Nearside Front Track rod end ball joint has slight play (2.2.B.1f)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Stop lamp not working (1.2.1b)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS
Nearside Front Track rod end ball joint has slight play (2.2.B.1f)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front position lamp(s) not in good working order (function impaired) (1.1.4a)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Brake pad(s) wearing thin (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Brake pad(s) wearing thin (3.5.1g)
Emissions not tested (7.0)
Inner Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim not tested (1.8.A.1c)
Nearside Headlamp not working on dipped beam (1.7.5a)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Rear Exhaust system not adequately supported (7.1.1)
Nearside Brake pad(s) wearing thin (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Headlamp aim not tested (1.8.A.1c)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Registration plate lamp not working (1.1.5c)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pad(s) wearing thin (3.5.1g)
rear no plate in poor condition
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN03 BHX is a 2003 Peugeot 206 in Silver with a 1,398cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 47.6%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BN03 BHX, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BN03 BHX?
You can check the full history of BN03 BHX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN03 BHX registered?
BN03 BHX is a 2003 Peugeot 206, first registered on 12 May 2003.
Is BN03 BHX safe to buy?
The MOT history for BN03 BHX shows 21 tests with a 47.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN03 BHX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN03 BHX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.