MOT Status
ExpiredMileage
59,845 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
general corrosion noticed and advice
Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
general corrosion noticed and advice
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Brake pipe corroded, covered in grease or other material pipes to load sensing valve (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Brake pipe corroded, covered in grease or other material pipes to load sensing valve (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Silencer hitting body of car
Front Headlamp has a product on the lens so that the light output is severely reduced Both (4.1.4 (b))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Driver's seat moving inadvertently (6.2.5 (b) (ii)) DANGEROUS
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Silencer hitting body of car
Nearside Front wing damaged near door opening area
Offside Front tyre staring to wear inner edge
Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)
slight play in offside inner rack end
slight scratching to windscreen offside area
Emissions not tested due to exhaust blows (7.3.A.1)
Front Exhaust has a major leak of exhaust gases intermediate pipe split and blowing (7.1.2)
Rear Exhaust has a major leak of exhaust gases exhaust silencer input pipe area holed and blowing (7.1.2)
Nearside Front wing damaged near door opening area
Offside Front tyre staring to wear inner edge
Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)
slight play in offside inner rack end
slight scratching to windscreen offside area
nearside from seat tilt lever missing
oil leak engine area
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits due to exhaust blow (7.3.D.3)
Exhaust has a major leak of exhaust gases rear silencer clamp area (7.1.2)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front coil spring broken (2.4.C.1a) DANGEROUS
nearside from seat tilt lever missing
oil leak engine area
Exhaust has a minor leak of exhaust gases (7.1.2)
Play in steering rack inner joint(s)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Oil leak
Exhaust has a major leak of exhaust gases (7.1.2)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Play in steering rack inner joint(s)
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Direction indicator incorrect colour (1.4.A.2f)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside front brake binding (3.7.B.1)
Side repeater incorrect colour (1.4.A.2f)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Headlamp aim too high (1.8)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Play in steering rack inner joint(s)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Front Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
offside front tyre starting to wear off on inner edge
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Front Exhaust has part of the system slightly deteriorated (7.1.1a)
Nail in offside rear tyre
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside rear tyre heavily perished
Suspension joint nearside lower dust cover split/missing
Suspension joint offside lower dust cover split/missing
load sensing valve piston stiff
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Brake load sensing valve linkage seized (3.6.E.3)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Front Exhaust has part of the system slightly deteriorated (7.1.1a)
Nail in offside rear tyre
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too high (1.8)
Offside rear tyre heavily perished
Suspension joint nearside lower dust cover split/missing
Suspension joint offside lower dust cover split/missing
load sensing valve piston stiff
Front bumper insecure
Offside Front Direction indicators slightly discoloured (1.4.A.2f)
Side repeater slightly discoloured (1.4.A.2f)
Suspension joint nearside lower dust cover split/missing
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Front bumper insecure
Offside Front Direction indicators slightly discoloured (1.4.A.2f)
Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Side repeater slightly discoloured (1.4.A.2f)
Suspension joint nearside lower dust cover split/missing
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Suspension joint nearside lower dust cover split/missing
Suspension joint offside lower dust cover split/missing
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)
Suspension joint nearside lower dust cover split/missing
Suspension joint offside lower dust cover split/missing
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN03 BTE is a 2003 Peugeot 206 in Grey with a 1,360cc petrol engine. This vehicle has been through 28 MOT tests with a personal pass rate of 60.7%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BN03 BTE, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BN03 BTE?
You can check the full history of BN03 BTE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN03 BTE registered?
BN03 BTE is a 2003 Peugeot 206, first registered on 4 March 2003.
Is BN03 BTE safe to buy?
The MOT history for BN03 BTE shows 28 tests with a 60.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN03 BTE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN03 BTE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.