2003 Peugeot 206

Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Exhaust mounting defective (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge tyre wall, perished , cracked (5.2.3 (e))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Rear Registration plate inscription illegible (0.1 (b))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge tyre wall, perished , cracked (5.2.3 (e))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

repair on exhaust downpipe.

Brake pipe slightly corroded and pipe ends (3.6.B.2c)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Suspension arm rubber bush deteriorated but not resulting in excessive movement offside and nearside front (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Tyre has a bulge, caused by separation or partial failure of its structure and splitting offside rear (4.1.D.1b)

Brake pipe slightly corroded and pipe ends (3.6.B.2c)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Suspension arm rubber bush deteriorated but not resulting in excessive movement offside and nearside front (2.4.G.2)

Exhaust has a minor leak of exhaust gases front pipe (7.1.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Suspension arm rubber bush deteriorated but not resulting in excessive movement offside and nearside front (2.4.G.2)

wipers smearing

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Exhaust has a minor leak of exhaust gases front pipe (7.1.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Suspension arm rubber bush deteriorated but not resulting in excessive movement offside and nearside front (2.4.G.2)

wipers smearing

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front Tyre worn close to the legal limit (4.1.E.1)