2003 Peugeot 206

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

beam image border line pass

Brake hose has slight corrosion to ferrule both rears (1.1.12 (f) (i))

Suspension arm ball joint has slight play both front (5.3.4 (a) (i))

reverse lights inop

Brake pipe excessively corroded front to rear (1.1.11 (c))

Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Headlamp aim projected beam image is obviously incorrect both lenses fogged (4.1.2 (c))

Brake hose has slight corrosion to ferrule both rears (1.1.12 (f) (i))

Suspension arm ball joint has slight play both front (5.3.4 (a) (i))

reverse lights inop

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

reversing lights not working

Brake pipe slightly corroded one front to rear (3.6.B.2c)

Offside Brake pipe slightly corroded to rear (3.6.B.2c)

both front lower arm bushes perishing

both rear tyre wall perishing on tyre walls

dip stick broken

front discs in poor condition

Offside Brake pipe slightly corroded to rear (3.6.B.2c)

Offside Stop lamp not working (1.2.1b)

both front lower arm bushes perishing

both rear tyre wall perishing on tyre walls

dip stick broken

front discs in poor condition

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

both front lower arm bushes perishing

front brake discs inner surfaces in poor condition

both front lower arm bushes perishing

front brake discs inner surfaces worn

front exhaust mounting to gearbox bolt missing

n/s/f tyre worn on outer edge (BORDERLINE PASS)

o/s/f and front to rear brake pipes starting to corrode (greased up)

Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS

both front lower arm bushes perishing

front brake discs inner surfaces worn

front exhaust mounting to gearbox bolt missing

n/s/f tyre worn on outer edge (BORDERLINE PASS)

o/s/f and front to rear brake pipes starting to corrode (greased up)

blow on exhaust front joint and pipe corroded.bolt missing from exhaust to gear-box bracket.

light cracking on drive belt.

noise from os drive shaft.

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

rubber boot split on o/s/f lower ball joint

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Oil leak

nsf tyre badly cracked/perished in wall to treaded area!

rubber bush bonding deteriorated on osf arm rear bush (BORDERLINE PASS!).

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

exhaust corroded † †both tyres low on tread