MOT Status
ExpiredMileage
222,034 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Rear Service brake fluctuating, but not excessively near legal limit (1.2.1 (e))
Service brake requirements only just met. It would appear that the braking system requires adjustment or repair offside & nearside rear (1.2.1 (c))
indicator switch worn near to legal limit
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security underneath (6.2.2 (d) (i))
all suspension correded
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Front Drive shaft flexible coupling excessively deteriorated (6.1.7 (d) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security underneath (6.2.2 (d) (i))
all suspension correded
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Rear fog lamp not working (1.3.2b)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Rear fog lamp not working (1.3.2b)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Brake load sensing valve seized (3.6.E.3)
Nearside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)
Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Nearside Stop lamp adversely affected by the operation of another lamp (1.2.1f)
Offside Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front position lamp(s) not working (1.1.A.3b)
Parking brake lever has no reserve travel (3.1.6b)
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Direction indicator not working (1.4.A.2c)
Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
o/s/r tyre worn on inside
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
o/s/r tyre worn on inside
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Headlamp not working on dipped beam (1.7.5a)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
Rear registration plate deteriorated (6.3.1d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear position lamp(s) incomplete (1.1.4a)
Nearside Rear position lamp(s) incorrect colour (1.1.A.3e)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN03 KWD is a 2003 Peugeot 206 in Red with a 1,398cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 61.9%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BN03 KWD, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BN03 KWD?
You can check the full history of BN03 KWD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN03 KWD registered?
BN03 KWD is a 2003 Peugeot 206, first registered on 26 March 2003.
Is BN03 KWD safe to buy?
The MOT history for BN03 KWD shows 21 tests with a 61.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN03 KWD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN03 KWD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.