2003 Toyota Landcruiser

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement drop links (5.3.4 (a) (i))

Rear Upper Shock absorbers has a slightly worn bush both sides (5.3.2 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive back bumper inner rail (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive underside of vehicle front and rear (5.3.6 (a) (i))

both head lamps starting too fade

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt both sides x2 (5.3.4 (b) (ii))

Rear Exhaust system insecure (6.1.2 (a))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Headlamp aim too low (4.1.2 (a))

Rear Suspension component mounting prescribed area is corroded but not considered excessive back bumper inner rail (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive underside of vehicle front and rear (5.3.6 (a) (i))

both head lamps starting too fade

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

front headlight lenses faded

timing belt required

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

front headlight lenses faded

timing belt required

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement "d"bush (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement "d" bush (5.3.4 (a) (i))

headlight lenses faded

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement "D"bushes (2.4.G.2)

both headlights faded

body damage

front antiroll bar "D"bushes worn/play

Front registration plate deteriorated (6.3.1d)

Offside Front Service brake grabbing severely (3.7.C.2)

body damage

front antiroll bar "D"bushes worn/play

front discs corroded

front antiroll bar"D"bushes worn/slight play

front number plate slight deterioration

bonnet struts weak

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

bonnet struts weak

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

bonnet struts weak/dangerous

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)