MOT Status
ExpiredMileage
75,075 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Seat belt anchorage prescribed area is excessively corroded n/s/sill and floor holed (5.2.6)
Seat belt anchorage prescribed area is excessively corroded o/s/sill and floor holed (5.2.6)
Suspension arm rubber bush deteriorated resulting in excessive movement both rear axle bushs worn (2.4.G.2)
Offside Rear Vehicle structure has damage which adversely affects braking or steering (6.1.A.1)
Registration plate lamp not working (1.1.C.1d)
Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear axle bushs (2.4.G.2)
Exhaust front mounting hanger corroded off
Nearside front tyre damaged on outer sidewall
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear coil spring broken (2.4.C.1a)
Windscreen washer provides insufficient washer liquid (8.2.3)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
exhaust front mounting hanger corroded off
nearside front tyre damaged on outer sidewall
Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Registration plate lamp not working (1.1.C.1d)
general underbody corrosion present.
Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
general underbody corrosion present.
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Exhaust system not adequately supported (7.1.1)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Brake pipe slightly corroded (3.6.B.2c)
Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Headlamp aim too high and too far to the right. (1.8)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Headlamp aim too far to the right (1.8)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake valve corroded and excessively weakened (3.6.A.2b)
Offside Rear Brake valve corroded and excessively weakened (3.6.A.2b)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear coil spring fractured (2.4.C.1a)
Offside Rear coil spring fractured (2.4.C.1a)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp aim too low (1.8)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp aim too low (1.8)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN03 POH is a 2003 Ford Ka in Red with a 1,299cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 54.5%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BN03 POH, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BN03 POH?
You can check the full history of BN03 POH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN03 POH registered?
BN03 POH is a 2003 Ford Ka, first registered on 21 March 2003.
Is BN03 POH safe to buy?
The MOT history for BN03 POH shows 22 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN03 POH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN03 POH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.