MOT Status
ExpiredMileage
76,315 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Direction indicator not working (1.4.A.2c)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Headlamp aim too far to the right (1.8)
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Oil leak
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Front Brake pad(s) wearing thin (3.5.1g)
Emissions not tested (7.0)
Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Inner Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Nearside Outer Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
water leak from thermostat
Nearside Front Steering rack gaiter split (2.2.D.2d)
Nearside Rear coil spring incomplete (2.4.C.1a)
Offside Front Steering rack gaiter split (2.2.D.2d)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Road wheel bead rim badly distorted (4.2.A.1a)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Headlamp not working on main beam (1.7.5a)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Registration plate lamp not working (1.1.5c)
Offside Rear Registration plate lamp not working (1.1.5c)
Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)
Nearside Front Shock absorber has negligible damping effect (2.7.5)
Nearside Rear coil spring fractured (2.4.C.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
front brake application uneven (3.7.B.2)
Nearside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Nearside Rear Stop lamp not working (1.2.1b)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN03 PZM is a 2003 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 47.4%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BN03 PZM, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BN03 PZM?
You can check the full history of BN03 PZM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN03 PZM registered?
BN03 PZM is a 2003 Ford Ka, first registered on 12 March 2003.
Is BN03 PZM safe to buy?
The MOT history for BN03 PZM shows 19 tests with a 47.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN03 PZM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN03 PZM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.