2003 Peugeot 206

Front Lower Anti-roll bar linkage ball joint dust cover severely deteriorated both (5.3.4 (b) (i))

Nearside Rear Nail in tyre ()

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear shock absorber weak

Oil leak, but not excessive (8.4.1 (a) (i))

Rear exhaust silencer slightly insecure

Steering rack has slight free play detected at steering wheel (2.3 (a) (i))

Headlamp are incorrectly positioned both (4.1.4 (a))

Horn not working (7.7 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear fog lamp not working has a red bulb in it (4.5.1 (a) (ii))

Rear reflector missing both (4.8.2 (a) (ii))

Front Lower Anti-roll bar linkage ball joint dust cover severely deteriorated both (5.3.4 (b) (i))

Nearside Rear Nail in tyre ()

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear exhaust silencer slightly insecure

Steering rack has slight free play detected at steering wheel (2.3 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front brake disc worn, pitted or scored, but not seriously weakened inner very poor 40% contact area (3.5.1i)

Offside Front main beam adjustment required - aims too high and central

Rear back box poorly secured - bracket rubbing on spare. fouling rear bumper

tyres different aspect ratio front to rear

Front Windscreen wiper does not clear the windscreen effectively both (8.2.2)

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Front Headlamp aim too low (1.8)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Brake load sensing valve seized (3.6.E.3)

Offside Rear Tyre tread depth below requirements of 1.6mm sidewall perished (4.1.E.1)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front brake disc worn, pitted or scored, but not seriously weakened inner very poor 40% contact area (3.5.1i)

Offside Front main beam adjustment required - aims too high and central

Rear back box poorly secured - bracket rubbing on spare. fouling rear bumper

tyres different aspect ratio front to rear

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Horn not working (1.6.2a)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Corrosion on exhaust.

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Wheel stud(s) missing (4.2.A.1e)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear position lamp(s) incorrect colour (1.1.A.3e)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Corrosion on exhaust.

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Off side rear wheel bearing is slightly noisy.

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Brake load sensing valve seized (3.6.E.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Horn not working (1.6.2a)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Front and rear tyres have different aspect ratios.

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Off side rear wheel bearing is slightly noisy.

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Brake pipe excessively corroded (3.6.B.2c)

Centre Rear fog lamp not working (1.3.2b)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

o/s wiper blade to big & hitting windscreen pillar

Nearside Front Lower Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Upper Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Upper Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Brake load sensing valve seized (3.6.E.3)

Nearside Headlamp aim too low (1.8)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Lower Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Upper Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Upper Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Brake load sensing valve linkage defective and function impaired (3.6.E.3)

Nearside Headlamp aim too low (1.8)

Offside rear brake recording little or no effort (3.7.B.5a)

Rear fog lamp not working (1.3.2b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

n/s/f tyre sidewall heavily scrubbed (curb)

n/s headlamp slightly low

Nearside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)