2004 Ford Transit

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively split (3.4 (b) (ii))

Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively split (3.4 (b) (ii))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Inner Sill corroded not within 30cm

Offside Front Striker plate has slight corrosion

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under arch (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under arch (6.1.1 (c) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bottom of strut mount (5.3.6 (a) (i))

Central Rear Vehicle structure is corroded but structural rigidity is not significantly reduced cross member rear of cab (6.1.1 (c) (i))

Nearside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced on top of chassis leg (6.1.1 (c) (i))

Central Rear Vehicle structure is corroded but structural rigidity is not significantly reduced cross member rear of cab (6.1.1 (c) (i))

Centre crossmember near handbrake cable mount corroded

Centre crossmember near prop shaft mounting corroded

Nearside Rear Outer Sill Corroded

Nearside Front brake disc worn, pitted or scored, but not seriously weakened inner surface (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened inner surface (3.5.1i)

nearside rear inner tyre inner tyre wall cracking & perishing

offside rear inner tyre inner tyre wall cracking & perishing

Centre Rear Statutory seat belt missing (5.1.1)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Statutory seat belt missing (5.1.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

n/s/r outer sill holed

o/s/r wheel arch missing

Nearside Brake pipe inadequately supported (3.6.B.1)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Brake pipe inadequately supported (3.6.B.1)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear fog lamp not working (1.3.2b)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp not working (1.2.1b)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

n/s/r outer sill holed

Fuel cap/sealing device missing (7.2.4a)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

brake & clutch pedal rubbers slightly worn

Brake pipe excessively corroded (3.6.B.2c)

Front registration plate deteriorated (6.3.1d)

Nearside Front Bonded suspension unit deteriorated and cannot function as intended (2.4.F.3)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

brake & clutch pedal rubbers slightly worn

Nearside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Offside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

o/s & n/s front brake pipes painted