MOT Status
ExpiredMileage
136,337 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Headlamp aim too high (4.1.2 (a))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end plate (5.3.6 (a) (i))
Offside Front Body component corroded and likely to cause injury wheel arch corroded sharp edges (6.2.1 (a) (i))
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch behind cover (7.1.1 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end plate (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front fuel pipes corroded
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear fuel tank support straps are slightly corroded
fuel filler neck pipe corroded
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing and chassis area (5.3.6 (a) (i))
Nearside Front lower wing is slightly corroded but producing a sharp edge at time of test
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill area and chassis area (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material all rear brake pipes around front bulkhead area (1.1.11 (c))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing and chassis area (5.3.6 (a) (i))
Offside Front fuel pipes corroded around bulkhead area
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill area and chassis area (5.3.6 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear fuel tank support straps are slightly corroded
all suspension arms front and rear are slightly corroded but not considered excessive at time of test
Front Fuel Pipe/s corroded around bulkhead area ()
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing and chassis leg areas (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill and rear subframe mount areas (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material all brake pipes around bulkhead area (1.1.11 (c))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing and chassis leg areas (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill and subframe mount areas (5.3.6 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear fuel tank support straps are slightly corroded
all suspension arms are slightly corroded but not considered excessive at time of test
Front Brake pipe corroded, covered in grease or other material all brake pipes around bulkhead/servo area (1.1.11 (c))
Front fuel pipes are slightly corroded around bulkhead area
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing/turret area and chassis leg areas (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing/turret area and chassis leg area (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (5.3.6 (a) (i))
Rear both fuel tank straps are slightly corroded
Front Brake pipe corroded, covered in grease or other material both pipes from front to rear are slightly corroded around bulk head area (1.1.11 (c))
Front power steering fluid low
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing/turret and chassis leg area (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive chassis area (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing/turret area and chassis leg area (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive chassis area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (5.3.6 (a) (i))
both fuel tank support straps are slightly corroded
fuel pipes are slightly corroded around bulkhead area
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing/turret area and chassis leg (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis area (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material both brake lines front to rear .front bulk head area (1.1.11 (c))
Offside Front Fuel Pipe/s corroded on bulkhead area ()
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing/turret area and chassis leg (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (5.3.6 (a) (i))
Power steering close to minimum mark (2.1.5 (b) (i))
Front Brake pipe corroded, covered in grease or other material bulk head area both pipes to rear (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis area (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing/turret area (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis area (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis area (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing/turret area (5.3.6 (a) (i))
Offside Front Tyre has a cut but not deep enough to reach the ply or cords inner side wall (5.2.3 (d) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (5.3.6 (a) (i))
Front Brakes imbalanced across an axle 32 percent imbalance (1.2.1 (b) (i))
Front Brake pipe corroded, covered in grease or other material bulk head area both pipes to rear (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis area (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing/turret area (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis area (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis area (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing/turret area (5.3.6 (a) (i))
Offside Front Tyre has a cut but not deep enough to reach the ply or cords inner side wall (5.2.3 (d) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (5.3.6 (a) (i))
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill area (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner sill area (2.4.A.3)
Offside Front tyre has slight damage /a small cut on inner side wall but not deep enough to reach ply/cords at time of test
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded around bulkhead/servo area (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (2.4.A.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
window screen has a small crack outside the swept area
Engine management light is on
Windscreen cracked outside swept area
How Reliable is the Ford Focus?
Based on 28,316,889 MOT tests across 2,072,617 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN05 LNH is a 2005 Ford Focus in Silver with a 1,596cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 89.5%.
Across all 2005 Ford Focus models, the average MOT pass rate is 72.7% with a typical mileage of 74,404 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Focus fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,055,468 recorded failures. If you're considering buying BN05 LNH, it's worth having these areas checked by a mechanic before committing.
The Ford Focus typically stays on UK roads for around 27 years. At 21 years old, this Ford Focus is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BN05 LNH?
You can check the full history of BN05 LNH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN05 LNH registered?
BN05 LNH is a 2005 Ford Focus, first registered on 2 March 2005.
Is BN05 LNH safe to buy?
The MOT history for BN05 LNH shows 19 tests with a 89.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN05 LNH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN05 LNH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.