MOT Status
ExpiredMileage
143,354 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Anti-roll bar linkage pin or bush worn but not resulting in excessive movement n/s/f and o/s/f (5.3.4 (a) (i))
Anti-roll bar pin or bush worn but not resulting in excessive movement n/s/f and o/s/f 'D' bushes (5.3.4 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Brake pipe corroded, covered in grease or other material across rear axle (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Integral body structure is corroded but structural rigidity is not significantly reduced rear floor (6.1.1 (c) (i))
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security body mounts (6.2.2 (d) (i))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner arch (6.2.2 (d) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced by spring mount (6.1.1 (c) (i))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner arch (6.2.2 (d) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Position lamp slightly affected by the operation of another lamp n/s/r and o/s/r (4.2.3 (c))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Wheel bearing has slight play n/s/r and o/s/r (5.1.3 (a) (i))
front radiator support bracket corroded
Exhaust silencer insecure bracket broken (8.1.1 (b) (i))
Exhaust system insecure front bracket broken (6.1.2 (a))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Offside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front cross member (6.1.1 (c) (i))
Nearside Front Headlamp insecure (4.1.1 (c))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Front Tyre(s) with different structures are fitted across the same axle (5.2.3 (c))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced N/S/F body mounting has corrosion (6.1.1 (c) (i))
Offside Front Headlamp aim too high (4.1.2 (a))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Front Suspension arm pin or bush excessively worn O/S/F upper arm bush's deteriorated with excessive movement (5.3.4 (a) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced O/S/R chassis corroded nr body mounting (6.1.1 (c) (i))
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced N/S/R chassis corroded nr body mounting (6.1.1 (c) (i))
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear chassis cross support excessive corrosion (6.1.1 (c) (i))
Brake fluid warning lamp illuminated (1.1.10 (f))
Front front arm bump stop rubber missing
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge N/S/F on limit (5.2.3 (e))
Nearside Rear Body mounting fixing insecure, but overall security not significantly reduced N/S/R bed mountings and floor corroded (6.2.2 (c) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside O/S sill corroded
radiator insecure
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Tyre worn close to legal limit/worn on edge BOTH (5.2.3 (e))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Tyre slightly damaged/cracking or perishing ALL 4 (5.2.3 (d) (ii))
Central Rear Seat belt cut but webbing not significantly weakened (5.2.2a)
Offside Rear tyre worn inner edge
corrosion around front offside and front nearside body mountings
corrosion around rear body mountings
corrosion front and rear chassis
corrosion rear cargo floor
front crossmember badly corroded/ radiator insecure
Brake pipe inadequately supported front to rear pipes (3.6.B.1)
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting chassis (6.6.6)
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Rear Rear fog lamp not working (1.3.2b)
Offside Rear Suspension component mounting prescribed area is excessively corroded chassis (various areas) (2.4.A.3)
Central Rear Seat belt cut but webbing not significantly weakened (5.2.2a)
Offside Rear tyre worn inner edge
corrosion around rear body mountings
corrosion front and rear chassis
corrosion rear cargo floor
front body crossmember badly corroded/ radiator insecure
front offside and front nearside around body mountings badly corroded
Front inner & outer cross member under radiator corroded
Front nearside tyre perished
Nearside & offside inner sills rusty
Brake performance not tested (3.7.A.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded cross member (2.4.A.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis behind fuel tank (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded cross member (2.4.A.3)
Braking system leaking brake pipe (3.6.A.1) DANGEROUS
Front inner & outer cross member under radiator corroded
Front nearside tyre perished
Nearside & offside inner sills rusty
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Front Vehicle structure has slight corrosion both side surface rust (6.1.B.2)
Front underbody oil sprayed ,also brake pipes
Rear Vehicle structure has slight corrosion both sides welded repair ,other chassis welding (6.1.B.2)
Front Vehicle structure has slight corrosion both side surface rust (6.1.B.2)
Front Windscreen wiper does not clear the windscreen effectively both wipers spilt (8.2.2)
Front underbody oil sprayed ,also brake pipes
Nearside Rear Stop lamp has less than 50% of the light sources illuminating inop (1.2.1b)
Rear Vehicle structure has slight corrosion both sides welded repair ,other chassis welding (6.1.B.2)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Front Vehicle structure has slight corrosion (6.1.B.2)
fuel tank cover rusty
surface rust on offside and nearside chassis
Front Exhaust has a minor leak of exhaust gases (7.1.2)
fuel tank cover rusty
surface rust on rear chassis
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pipe slightly corroded (3.6.B.2c)
exhaust mounting brackets rusty
surface rust on inner sills
surface rust on rear chassis
Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
offside front tyre cut on outer wall
offside front tyre has small cuts on outer wall
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Ford Ranger?
Based on 1,687,380 MOT tests across 189,558 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN05 XWD is a 2005 Ford Ranger in Grey with a 2,499cc diesel engine. This vehicle has been through 18 MOT tests with a personal pass rate of 72.2%.
Across all 2005 Ford Ranger models, the average MOT pass rate is 71.5% with a typical mileage of 89,399 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ranger fails its MOT is brake pipe excessively corroded, accounting for 41,033 recorded failures. If you're considering buying BN05 XWD, it's worth having these areas checked by a mechanic before committing.
The Ford Ranger typically stays on UK roads for around 27 years. At 21 years old, this Ford Ranger is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BN05 XWD?
You can check the full history of BN05 XWD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN05 XWD registered?
BN05 XWD is a 2005 Ford Ranger, first registered on 7 March 2005.
Is BN05 XWD safe to buy?
The MOT history for BN05 XWD shows 18 tests with a 72.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN05 XWD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN05 XWD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.