MOT Status
ExpiredMileage
155,601 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Road wheel badly distorted (5.2.2 (c) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Road wheel badly distorted (5.2.2 (c) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Road wheel badly distorted (5.2.2 (c) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))
Offside Front Headlamp light intensity severely reduced (4.1.4 (a))
Offside Rear Brake pipe corroded, covered in grease or other material to flexi (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Emissions not tested due to major exhaust leak (8.2.1.2 (d))
Front Exhaust has a major leak of exhaust gases pipe (6.1.2 (a))
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))
Offside Front Headlamp aim too low (4.1.2 (a))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))
Windscreen washer not working (3.5 (a))
Electronic power steering warning lamp indicates a failure in the system (2.3.8)
Power steering inoperative (2.3.3a)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Tyre worn close to the legal limit on 2m (4.1.E.1)
Nearside Front front brake fluctuating, but not excessively (3.7.B.3)
Nearside Rear Tyre worn close to the legal limit on 2m (4.1.E.1)
Offside Front Road wheel slightly damaged on inside edge (4.2.A.1a)
Offside Front Tyre worn close to the legal limit on 2m (4.1.E.1)
eml light on
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside and offside front brake discs slightly corroded
Nearside and offside rear tyres wearing more on outer edge than rest of tyre
Offside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Centre Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN06 AGO is a 2006 Peugeot 107 in Silver with a 998cc petrol engine. This vehicle has been through 29 MOT tests with a personal pass rate of 55.2%.
Across all 2006 Peugeot 107 models, the average MOT pass rate is 72.9% with a typical mileage of 58,420 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying BN06 AGO, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 20 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BN06 AGO?
You can check the full history of BN06 AGO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN06 AGO registered?
BN06 AGO is a 2006 Peugeot 107, first registered on 1 March 2006.
Is BN06 AGO safe to buy?
The MOT history for BN06 AGO shows 29 tests with a 55.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN06 AGO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN06 AGO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.