MOT Status
ExpiredMileage
248,337 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Rear Service brake excessively fluctuating (1.2.1 (e))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge edged (5.2.3 (e))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge edged (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Tyre slightly damaged (5.2.3 (d) (ii))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Tyre slightly damaged (5.2.3 (d) (ii))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Exhaust emissions exceed manufacturer's specified limit Limit 0.72 (8.2.2.2 (a))
Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Outer Brake disc worn, pitted or scored, but not seriously weakened side (1.1.14 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))
Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Outer Brake disc worn, pitted or scored, but not seriously weakened side (1.1.14 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Anti-roll bar linkage has excessive play in a ball joint both rear (2.4.G.2)
Nearside Rear Valve stem seriously damaged (4.1.D.1e)
Offside Front Headlamp aim too high (1.8)
Offside Rear Valve stem seriously damaged (4.1.D.1e)
Nearside Front Headlamp aim too high (1.8)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Honda Accord?
Based on 2,311,969 MOT tests across 198,303 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN06 UML is a 2006 Honda Accord in Black with a 2,209cc diesel engine. This vehicle has been through 24 MOT tests with a personal pass rate of 66.7%.
Across all 2006 Honda Accord models, the average MOT pass rate is 74.3% with a typical mileage of 98,038 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Accord fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 104,224 recorded failures. If you're considering buying BN06 UML, it's worth having these areas checked by a mechanic before committing.
The Honda Accord typically stays on UK roads for around 33 years. At 20 years old, this Honda Accord is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BN06 UML?
You can check the full history of BN06 UML by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN06 UML registered?
BN06 UML is a 2006 Honda Accord, first registered on 24 March 2006.
Is BN06 UML safe to buy?
The MOT history for BN06 UML shows 24 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN06 UML have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN06 UML. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.