MOT Status
ExpiredMileage
98,838 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive strut mounting area (5.3.6 (a) (i))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Fuel cap/sealing device ineffective (6.1.3 (b) (i))
Headlamp levelling device inoperative (4.1.5 (a))
Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around fuel filler (5.3.6 (a) (i))
Offside Front Headlamp aim not tested (4.1.2 (b))
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive strut mounting area (5.3.6 (a) (i))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Tyre slightly damaged/cracking or perishing nearside and offside (5.2.3 (d) (ii))
corrosion on floor pans
reverse lamp inoperative
Offside Direction indicator flashing more than 120 times a minute (4.4.4 (a))
Registration plate deteriorated but not likely to be misread front and rear (0.1 (b))
Tyre slightly damaged/cracking or perishing nearside and offside front perishing in tread (5.2.3 (d) (ii))
no reverse lights
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside rear inner and outer sill holed (5.3.6 (a) (i))
Offside Direction indicator flashing more than 120 times a minute (4.4.4 (a))
Registration plate deteriorated but not likely to be misread front and rear (0.1 (b))
Tyre slightly damaged/cracking or perishing nearside and offside front perishing in tread (5.2.3 (d) (ii))
no reverse lights
Front Brake disc worn, pitted or scored, but not seriously weakened nearside and offside (1.1.14 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
reverse light not working
surface corrosion inner floor panel
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Speedometer cannot be illuminated (7.8 (c) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened nearside and offside (1.1.14 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
reverse light not working
surface corrosion inner floor panel
Front Brake disc worn, pitted or scored, but not seriously weakened nearside and offside (1.1.14 (a) (ii))
surface rust on both inner sills
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill at rear (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill at rear (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened nearside and offside (1.1.14 (a) (ii))
surface rust on both inner sills
brake disc worn, pitted or scored, but not seriously weakened nearside and offside front inner faces (3.5.1i)
nearside rear outer sill slightly corroded
Nearside Headlamp not working on dipped beam (1.7.5a)
brake disc worn, pitted or scored, but not seriously weakened nearside and offside front inner faces (3.5.1i)
nearside rear outer sill slightly corroded
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Offside Stop lamp not working (1.2.1b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
offside front tyre starting to wear on inner tread
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
nearside rear tyre 3mm & badly perished(borderline pass)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
nearside rear tyre 3mm & badly perished(borderline pass)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN06 WJC is a 2006 Ford Ka in Blue with a 1,297cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 60%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BN06 WJC, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BN06 WJC?
You can check the full history of BN06 WJC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN06 WJC registered?
BN06 WJC is a 2006 Ford Ka, first registered on 28 March 2006.
Is BN06 WJC safe to buy?
The MOT history for BN06 WJC shows 25 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN06 WJC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN06 WJC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.