MOT Status
ExpiredMileage
68,890 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasse (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front of arm (5.3.4 (a) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front compliance bush coming away from metal collar (5.3.4 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Rear Tyre slightly damaged/cracking or perishing both tyres (5.2.3 (d) (ii))
Vehicle structure is corroded but structural rigidity is not significantly reduced nearside and offside front floor pans oppersite front subframe mounting bolts corroded (6.1.1 (c) (i))
offside and nearside inner and outer sills showing signs of corrosion
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front lower arm front compliance bush splitting
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
nearside and offside front floor pans oppersite subframe mounting bolts corroded
nearside and offside inner and outer sills showing signs of corrosion
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both sills (6.2.2 (d) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Spare tyre defective ()
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Spare tyre defective ()
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner strut (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner strut (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
both heel boards corroded
both rear beam bushes corroded
both rear tyres showing age related cracking
underneath of vehicle corroded
wiper blades in poor condition
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner strut (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner strut (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
both heel boards corroded
both rear beam bushes corroded
both rear tyres showing age related cracking
underneath of vehicle corroded
wiper blades in poor condition
Nearside Rear Position lamp not working (4.2.1 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Position lamp not working (4.2.1 (a))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner strut area (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner strut area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
both heel boards starting to corrode
both rear beam bushes worn
both rear tyres showing age related cracking/perishing
underneath of vehicle corroded
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
both rear tyres have large splits strongly rec replace no cords viable at this time meet mot criteria time of test
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Rear wheel bearing rough when rotated (2.6.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded suspension mounting point (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front wiper smearing slightly
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
both rear tyres have large splits strongly rec replace no cords viable at this time meet mot criteria time of test
Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Tyre Punctured.
Nearside Rear Unable to test seatbelt due to child seat fitted.
Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Child seat fitted not allowing full inspection of adult belt
Parking brake lever has little reserve travel (3.1.6b)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Parking brake lever has little reserve travel (3.1.6b)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Shock absorber has a slightly worn bush (2.7.4)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)
Offside Rear Shock absorber has a slightly worn bush (2.7.4)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Registration plate lamp insecure (1.1.C.1c)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Shock absorber has a slightly worn bush (2.7.4)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)
Offside Rear Shock absorber has a slightly worn bush (2.7.4)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Child seat fitted not allowing full inspection of adult belt
Child seat fitted not allowing full inspection of adult belt
n/s & o/s rear tyres perrished advise replacement soon.
Child seat fitted not allowing full inspection of adult belt
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Registration plate lamp not working (1.1.5c)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN06 WML is a 2006 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 65.2%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BN06 WML, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BN06 WML?
You can check the full history of BN06 WML by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN06 WML registered?
BN06 WML is a 2006 Ford Ka, first registered on 31 March 2006.
Is BN06 WML safe to buy?
The MOT history for BN06 WML shows 23 tests with a 65.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN06 WML have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN06 WML. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.