2007 Jaguar X-type

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Offside Brake pipe excessively corroded Front to rear (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure Inner edges (5.2.3 (d) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Suspension arm corroded but not seriously weakened Both sides (5.3.3 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Suspension arm corroded but not seriously weakened Both sides (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Both outer sills (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Fuel Pipe/s corroded ()

Rear Tyre slightly damaged/cracking or perishing Both rear (5.2.3 (d) (ii))

Offside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))

Brake hydraulic reservoir fluid not visible (1.1.10 (d) (iii)) DANGEROUS

Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Fuel Pipe/s corroded ()

Rear Tyre slightly damaged/cracking or perishing Both rear (5.2.3 (d) (ii))

Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Fuel tank insecure (6.1.3 (a) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure Splitting (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Offside Front Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Suspension arm pin or bush worn but not resulting in excessive movement Both rear upper (5.3.4 (a) (i))

front to rear brake pipe slightly corroded

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Road wheel slightly damaged (4.2.A.1a)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)