MOT Status
ExpiredMileage
139,696 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake performance unable to be tested (1.2.1 (g))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top mount (5.3.6 (a) (i))
Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened and arms and subfram (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened both inner sills (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive both inner sill and floor covers both sills (5.3.6 (a) (i))
Front Brake disc worn, but not excessively both (1.1.14 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
rear exhaust braket not secure
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake disc worn, but not excessively both (1.1.14 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
rear exhaust braket not secure
Front Suspension component mounting prescribed area is corroded but not considered excessive both floor (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened and arms (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Front Suspension component mounting prescribed area is corroded but not considered excessive both floor (5.3.6 (a) (i))
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened and arms (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front floor corrsion
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear subframe corrosion and arms off
both inner sills corrsion
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
slight corrosion to rear suspension components
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement bottom arm rear bush (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement bottom arm rear bush (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN07 UBF is a 2007 Mazda 3 in Blue with a 1,598cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 78.9%.
Across all 2007 Mazda 3 models, the average MOT pass rate is 74.7% with a typical mileage of 68,986 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying BN07 UBF, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 19 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BN07 UBF?
You can check the full history of BN07 UBF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN07 UBF registered?
BN07 UBF is a 2007 Mazda 3, first registered on 30 March 2007.
Is BN07 UBF safe to buy?
The MOT history for BN07 UBF shows 19 tests with a 78.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN07 UBF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN07 UBF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.