2008 Ford Ka

Dipswitch operation does not deflect all main beam headlamps to make them dipped beams (4.1.3 (b))

Front Exhaust system insecure (6.1.2 (a))

Front Windscreen washer not working (3.5 (a))

Headlamp aim unable to be tested dips not working (4.1.2 (b))

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside and offside rear inner wheel arch (6.1.1 (c) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Power steering pipe/hose excessively damaged fouling on tyre (2.1.5 (g) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Nearside Front Tyre fouling a part of the vehicle fouling power steering pipes (5.2.3 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/inner arch ect (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength undersill (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Suspension arm pin or bush excessively worn axle bush (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength undersill (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement axle bush (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

various places starting to corrode

Nearside Headlamp aim unable to be tested (4.1.2 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill end in Inner arch (5.3.6 (a) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch ( marked ) (6.1.1 (c) (i))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Headlamp aim unable to be tested (4.1.2 (b))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch ( Marked ) (6.1.1 (c) (i))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Corrosion various parts of vehicle

Headlamp switch does not immediately illuminate all main beam headlamps Switch sticking (4.1.3 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive Sill ( marked ) (7.1.1 (a) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

sills corroded

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Headlamp aim too high (4.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

sills corroded

Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Coolant leak from coolant tank ()

Coolant leak from thermostat housing ()

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Oil leak, but not excessive from rocker cover gasket (8.4.1 (a) (i))

Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge tyre bald on inner edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear rear plate crack

Rear rear washer inop

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge tyre bald on inner edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear rear plate crack

Rear rear washer inop

Nearside Rear Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Headlamp not working on dipped beam (1.7.5a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear position lamp(s) not working (1.1.A.3b)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

all tyres slight cracks

Nearside Rear Stop lamp not working (1.2.1b)

Offside Rear Stop lamp not working (1.2.1b)

Nearside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

Offside Front Bonded suspension unit deteriorated but can function as intended (2.4.F.3)

slight cracks in both rear tyres

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)