MOT Status
ExpiredMileage
88,064 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Rear Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Exhaust mounting defective (6.1.2 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Central Rear Engine mounting damaged but not to excess (6.1.8 (a) (i))
Exhaust mounting defective (6.1.2 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Exhaust mounting defective rear silencer (6.1.2 (a))
Rear both rear inner sills corroded
corrosion around fuel cap
Oil leak, but not excessive (8.4.1 (a) (i))
corrosion around fuel filler cap
rear exhaust hanger/bracket broken
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
corrosion around fuel filler cap
rear exhaust hanger/bracket broken
Around fuel filler cap is corroded.
Oil leak, but not excessive (8.4.1 (a) (i))
Rear exhaust hanger/bracket broken.
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Around fuel filler cap is corroded.
Oil leak, but not excessive (8.4.1 (a) (i))
Rear exhaust hanger/bracket broken.
top of fuel filler slight corrosion
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength innersill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
top of fuel filler slight corrosion
Nearside Front Tyre worn close to the legal limit worn edges (4.1.E.1)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Front Tyre worn close to the legal limit worn edges (4.1.E.1)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Rear n/s and o/s wheel bearings starting to become noisy
Nearside Rear Stop lamp not working (1.2.1b)
Offside Headlamp aim too low (1.8)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Tyre worn close to the legal limit worn edges (4.1.E.1)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Front Tyre worn close to the legal limit worn edges (4.1.E.1)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Rear n/s and o/s wheel bearings starting to become noisy
Offside Front Headlamp aim too low (1.8)
Nearside Stop lamp not working (1.2.1b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Oil leak
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Oil leak
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Stop lamp not working (1.2.1b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN08 WJA is a 2008 Ford Ka in Grey with a 1,299cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 59.1%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BN08 WJA, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BN08 WJA?
You can check the full history of BN08 WJA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN08 WJA registered?
BN08 WJA is a 2008 Ford Ka, first registered on 6 March 2008.
Is BN08 WJA safe to buy?
The MOT history for BN08 WJA shows 22 tests with a 59.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN08 WJA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN08 WJA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.