2009 Yamaha Yzf R125

Exhaust noisy (8.1.1 (a))

Oil leak from engine.

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake master cylinder leaking (1.1.10 (b) (ii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Oil leak from engine.

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Offside Front Shock absorber has a light misting of oil Fork seal (5.3.2 (b))

Headlamp aim too high (4.1.2 (a))

Offside Front Shock absorber has a light misting of oil Fork seal (5.3.2 (b))

All direction indicators not working (4.4.1 (a) (ii))

Headlamp aim too low (4.1.2 (a))

Rear Suspension arm attachment bracket/mounting insecure (5.3.3 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) DANGEROUS

Drive chain excessively loose (6.2.1d)

Fairings insecure and likely to impede the steering (2.1.2e)

Front Brake fluid reservoir insecurely mounted (3.2.B1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front position lamp missing both not working (1.1.1a)

Fuel system component insecure petrol tank insecure (7.2.1b)

Nearside Handlebar mounting clamp loose l/h handlebar loose (2.1.1a)

Offside Rear Direction indicators not working (1.5.1c)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Stop lamp does not emit a steady light rear brake light not functioning properly (1.3.1b)

Rear suspension bush has excessive free play (2.4.A2a(i))

Riders seat missing (6.2.1a)

Exhaust noisy (7.1.2)

number plate light not working

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort (3.3.A1c)

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Rear Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Front Tyre valve stem slightly damaged (4.1.2c)

Rear Tyre valve stem slightly damaged (4.1.2c)