2010 Chevrolet Matiz

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Anti-roll bar attachment bracket/mounting fractured (5.3.3 (b) (ii)) DANGEROUS

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Offside Front Anti-roll bar attachment bracket/mounting fractured (5.3.3 (b) (ii)) DANGEROUS

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside front support bracket bolts insecure

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Inner Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Central Rear Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Side repeater slightly discoloured (4.4.3 (a))

throttle pedal rubber missing

Central Rear Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Front Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Offside Side repeater slightly discoloured (4.4.3 (a))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

throttle pedal rubber missing

Offside Rear Rear wheel bearing has excessive play (2.6.2)

Nearside rear brake application uneven (3.7.B.2)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear brakes release unevenly (3.7.B.4)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

front tyres wearing on inside edges

Nearside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Front wheel bearing has excessive play (2.5.A.3c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)