2012 Ford Fiesta

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Rear Coil spring corroded BOTH (5.3.1 (b) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Rear Coil spring corroded BOTH (5.3.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Offside Front Tyre obviously under inflated (5.2.3 (l))

Offside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Offside Windscreen damaged but not adversely affecting driver's view stone chip (3.2 (a) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn n/s & o/s (5.1.2 (b) (i))

Rear Coil spring corroded n/s & o/s (5.3.1 (b) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Offside Front Tyre obviously under inflated (5.2.3 (l))

Offside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Offside Windscreen damaged but not adversely affecting driver's view stone chip (3.2 (a) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn n/s & o/s (5.1.2 (b) (i))

Rear Coil spring corroded n/s & o/s (5.3.1 (b) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Outer sill damaged

Offside Play in steering rack inner joint(s) slight ()

Offside Windscreen damaged but not adversely affecting driver's view stone chip (3.2 (a) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn n/s and o/s (5.1.2 (b) (i))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Outer sill damaged

Nearside Rear Nail in tyre ()

Offside Play in steering rack inner joint(s) slight ()

Offside Windscreen damaged but not adversely affecting driver's view stone chip (3.2 (a) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn n/s and o/s (5.1.2 (b) (i))

Nearside Front Tyre obviously under inflated (5.2.3 (l))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Tyre obviously under inflated (5.2.3 (l))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

n/s front wheel nuts wrong way

Nearside Front Outer Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)