2012 Ford Mondeo

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Exhaust mounting defective system still secure (6.1.2 (a))

Offside Front Outer cv boot clip replaced, grease slightly weeping but boot is okay

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

exhaust heat shield slightly loose but not insecure

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Shock absorbers has negligible damping effect (5.3.2 (d))

Offside Front Shock absorbers has negligible damping effect (5.3.2 (d))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Exhaust mounting defective system still secure (6.1.2 (a))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

exhaust heat shield slightly loose but not insecure

Nearside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush cracking (5.3.4 (a) (i))

Offside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush cracking (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

exhaust heat shield loose

exhaust system corrosion around mountings

general under body corrosion

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Items removed from driver's view prior to test ()

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Items removed from driver's view prior to test ()

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear fog lamp not working (1.3.2b)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

exhaust heat shield insecure

exhaust system corroded

under-tray fitted

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Rear fog lamp not working (1.3.2b)

exhaust system corroded

under-tray fitted

exhaust heat shield insecure

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

Engine covers fitted obscuring some components in the engine bay