MOT Status
ExpiredMileage
118,443 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material all front to rear (1.1.11 (c))
Front Anti-roll bar linkage ball joint has slight play both sides (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))
Front Coil spring corroded both sides (5.3.1 (b) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake load sensing valve stiff and corroded (1.1.17 (c) (ii))
Tyre slightly damaged/cracking or perishing all four (5.2.3 (d) (ii))
under vehicle prescribed area and suspension/braking components slightly corroded
Brake valve corroded but not excessively weakened (3.6.A.2b)
Front Brake pad(s) wearing thin both sides (3.5.1g)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Front brake disc worn, pitted or scored, but not seriously weakened both sides (3.5.1i)
Front coil spring corroded both sides (2.4.C.1b)
Lower engine mounting deteriorated, but not resulting in excessive movement (6.1.D.1a)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement wishbone bushes (2.4.G.2)
Oil leak ()
Rear Tyre worn close to the legal limit both sides (4.1.E.1)
front to rear brake pipes are slightly corroded and some covered
under vehicle suspension/braking components are slightly corroded
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Body has slight corrosion (6.1.B.2)
Brake hose slightly deteriorated (3.6.B.4d)
Brake pipe slightly corroded (3.6.B.2c)
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Track rod end ball joint has slight play (2.2.B.1f)
Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
oil leak
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Centre Exhaust system not adequately supported (7.1.1)
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Steering rack insecure (2.2.B.1a)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Oil leak
Brake hose slightly deteriorated (3.6.B.4d)
Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Exhaust has a minor leak of exhaust gases (7.1.2)
Oil leak
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Brake hose slightly deteriorated (3.6.B.4d)
Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Brake load sensing valve linkage seized (3.6.E.3)
Exhaust mounting missing (7.1.1b)
Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN51 YWC is a 2001 Peugeot 206 in Silver with a 1,124cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2001 Peugeot 206 models, the average MOT pass rate is 66.3% with a typical mileage of 67,765 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BN51 YWC, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 25 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BN51 YWC?
You can check the full history of BN51 YWC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN51 YWC registered?
BN51 YWC is a 2001 Peugeot 206, first registered on 10 September 2001.
Is BN51 YWC safe to buy?
The MOT history for BN51 YWC shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN51 YWC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN51 YWC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.