2003 Honda Cr-v

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner/outer sill (5.3.6 (a) (i))

Nearside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Suspension component mounting prescribed area damaged but not considered excessive upper spring cups (5.3.6 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

corrosion under body

rear suspension arm bushes perished

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

corrosion under body

rear suspension arm bushes perished

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Windscreen damaged and affecting the driver's view of the road (3.2 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge INSIDE EDGE (5.2.3 (e))

corrosion to inner sills and suspension components

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Offside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Offside Rear Tyre worn close to legal limit/worn on edge INSIDE EDGE (5.2.3 (e))

corrosion to inner sills and suspension components

Nearside Front Lower Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Inner Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Vehicle structure has slight corrosion (6.1.B.2)

Nearside Front Lower Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Inner Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Vehicle structure has slight corrosion (6.1.B.2)

Vehicle structure has slight corrosion (6.1.B.2)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside front brake binding (3.7.B.1)

Vehicle structure has slight corrosion (6.1.B.2)

Nearside Front Lower Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Front Radius arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Offside Front Radius arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Passenger's seat insecure (6.2.A.1)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Radius arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Offside Front Radius arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

slight chips to windscreen

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

b oth front bottom arm bushes starting to crack and perish

both inner sills starting to corrode

brake pedal rubber worn

exhaust system starting to corrode

n/s/f wiper blade torn

n/s/r pads low

both front lower arm front bushes starting to crack and perish

both under sills starting to corrode

exhaust starting to corrode

o/s/f tyre wearing on edges and close to limit

small chips to screen

Both front wishbone mountings starting to crack and perish

Rear brake discs corroded

Sill covers fitted - unable to fully inspect sills

front exhaust section corroding

sill covers fitted sills not inspected

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.5c)

front exhaust section corroding

sill covers fitted sills not inspected

Front Headlamp aim too high (1.8)

Rear Registration plate lamp not working (1.1.C.1d)