MOT Status
ValidMileage
137,121 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Registration plate does not conform to the specified requirements (0.1 (d))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Registration plate does not conform to the specified requirements (0.1 (d))
Nearside Front Tyre tread depth below requirements of 1.6mm 195/65x15 (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm 195/65x15 (5.2.3 (e)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
fuel tank breather pipe corroded
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush centre frame split (5.3.4 (a) (i))
Offside Front Tyre obviously under inflated (5.2.3 (h) (i))
Suspension arm pin or bush worn but not resulting in excessive movement O/S/R & N/S/R trailing arms (5.3.4 (a) (i))
both rear tyres worn low O/S 2.5mm N/S 1.8mm
engine sump corroded & poor condition
engine undertray slightly insecure at O/S on one mount
rear exhaust mounts corroded
rear underbody & rear suspension corroded
Nearside Front Tyre worn close to the legal limit 2.5mm and slight damage to outer wall (4.1.E.1)
Nearside Rear Nail in tyre ()
Nearside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit 3mm and wearing on edges (4.1.E.1)
Offside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
exhaust support brackets corroded
fuel tank breather pipe corroded
paring brake only just met requirments
Front Brake pad(s) wearing thin 80% worn (3.5.1g)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
fuel tank breather pipe corroded
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin 80% worn (3.5.1g)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
fuel tank breather pipe corroded
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both rear tyres getting low, worn on edges & cracked around tread
small chips to windscreen zone A & B
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
small chips to windscreen
Parking brake: efficiency below requirements (3.7.B.7)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
small chips to windscreen
wipers poor (smear screen)
both front lower suspension arm rear mounting bushes split and worn not causing excessive movement at time of test
nearside outer sill damaged
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN56 DXH is a 2006 Mazda 3 in Silver with a 1,598cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 75%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying BN56 DXH, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BN56 DXH?
You can check the full history of BN56 DXH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN56 DXH registered?
BN56 DXH is a 2006 Mazda 3, first registered on 6 September 2006.
Is BN56 DXH safe to buy?
The MOT history for BN56 DXH shows 24 tests with a 75% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN56 DXH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN56 DXH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.