MOT Status
ExpiredMileage
81,936 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Emissions unable to be completed engine over heating (8.2.1.2 (d))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/arch (6.1.1 (c) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sills (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sills (5.3.6 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sills (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sills (5.3.6 (a) (i))
Front Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))
Front Exhaust mounting defective (6.1.2 (a))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced sill/arch (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced sill/arch (6.1.1 (c) (i))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush excessively worn axel bush (5.3.4 (a) (i))
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))
Oil leaking excessively from engine onto exhaust (8.4.1 (a) (i))
Exhaust shield missing where fitted as original equipment creating a risk of fire manifold (6.1.3 (e)) DANGEROUS
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement axel bush (5.3.4 (a) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced both side by sub-frame bracket (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Power steering component has slight seepage from a component steering rack (2.1.5 (a))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Rear Sub-frame pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced both side sill (6.1.1 (c) (i))
exhaust corroded
Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced both side by sub-frame bracket (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Sub-frame pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced both side sill (6.1.1 (c) (i))
exhaust corroded
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front tyre wearing thin on inner edge
Offside Front tyre wearing thin on inner edge
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside front lower arm bush starting to unbond
Offside front tyre worn to 3mm
Vehicle's internal headlight adjuster altered to recheck lights
Headlamp aim too low (1.8)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside front lower arm bush starting to unbond
Offside front tyre worn to 3mm
Vehicle's internal headlight adjuster altered to recheck lights
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN58 AUF is a 2008 Ford Ka in Purple with a 1,299cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 72.2%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BN58 AUF, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BN58 AUF?
You can check the full history of BN58 AUF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN58 AUF registered?
BN58 AUF is a 2008 Ford Ka, first registered on 1 September 2008.
Is BN58 AUF safe to buy?
The MOT history for BN58 AUF shows 18 tests with a 72.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN58 AUF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN58 AUF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.