MOT Status
ValidMileage
90,907 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened X2 (5.3.3 (b) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened X2 (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Bumper likely to become detached (6.1.4 (a) (ii))
Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Coil spring mounting corroded but not seriously weakened Both side rear (5.3.1 (b) (i))
Rear axle corroded
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
underbody surface rust
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Direction indicator incorrect colour (4.4.3 (a))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
underbody surface rust
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Suspension component corroded but not seriously weakened front & rear (5.3.3 (b) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Engine warning light on dash
Front registration plate delaminated but not likely to be misread (6.3.1d)
Nail in nearside rear tyre
Nail in offside rear tyre
Rear registration plate delaminated but not likely to be misread (6.3.1d)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN60 AVW is a 2010 Mazda 3 in Silver with a 1,598cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 82.4%.
Across all 2010 Mazda 3 models, the average MOT pass rate is 77.7% with a typical mileage of 68,318 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying BN60 AVW, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 16 years old, this Mazda 3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BN60 AVW?
You can check the full history of BN60 AVW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN60 AVW registered?
BN60 AVW is a 2010 Mazda 3, first registered on 11 September 2010.
Is BN60 AVW safe to buy?
The MOT history for BN60 AVW shows 17 tests with a 82.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN60 AVW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN60 AVW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.