MOT Status
ValidMileage
182,916 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Parking brake efficiency below requirements (1.4.2 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp aim too high (4.1.2 (a))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Tyre slightly damaged/cracking or perishing both fronts treads lifting s (5.2.3 (d) (ii))
Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Tyre slightly damaged/cracking or perishing both fronts treads lifting s (5.2.3 (d) (ii))
Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Front handbrake lever requires adjustment
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement perished (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Front Brakes imbalanced across an axle by more than 50% Axle 1 (1.2.1 (b) (ii)) DANGEROUS
Front Tyre worn close to legal limit/worn on edge both worn inner edge (5.2.3 (e))
Front handbrake lever requires adjustment
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement perished (5.3.4 (a) (i))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Headlamp not working on main beam (1.7.5a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear registration plate delaminated but not likely to be misread (6.3.1d)
all tyre treads cracked, not excessive.
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
Rear registration plate delaminated but not likely to be misread (6.3.1d)
all tyre treads cracked, not excessive.
How Reliable is the Hyundai I30?
Based on 1,479,391 MOT tests across 127,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BN60 KVD is a 2010 Hyundai I30 in Grey with a 1,582cc diesel engine. This vehicle has been through 24 MOT tests with a personal pass rate of 62.5%.
Across all 2010 Hyundai I30 models, the average MOT pass rate is 72.7% with a typical mileage of 62,639 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai I30 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 12,383 recorded failures. If you're considering buying BN60 KVD, it's worth having these areas checked by a mechanic before committing.
The Hyundai I30 typically stays on UK roads for around 19 years. At 16 years old, this Hyundai I30 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BN60 KVD?
You can check the full history of BN60 KVD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BN60 KVD registered?
BN60 KVD is a 2010 Hyundai I30, first registered on 13 October 2010.
Is BN60 KVD safe to buy?
The MOT history for BN60 KVD shows 24 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BN60 KVD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BN60 KVD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.