2012 Ford S-max

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Exhaust system insecure 2 brackets detatched (6.1.2 (a))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick all (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge 1.8mm (5.2.3 (e))

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Nail in tyre screw in tyre

Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Nail in tyre screw in tyre

Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i))

Rear Reversing lamp inoperative (4.6.1 (a))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Registration plate lamp insecure (4.7.1 (c) (i))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Reversing lamp inoperative (4.6.1 (a))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords worn, cord showing. (4.1.D.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Nearside Front Inner Bald, just legal.

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)