2001 Mercedes-benz Vito

Central Rear Brake load sensing valve stiff (1.1.17 (c) (ii))

Central Rear Spare tyre defective Under inflated Slight cracking/perishing ()

Front Brake pipe corroded, covered in grease or other material Both front pipes (1.1.11 (c))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Steering linkage ball joint has slight play (2.1.3 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Oil leak, but not excessive Engine (8.4.1 (a) (i))

Offside Front Play in steering rack inner joint(s) ()

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Brake hose has slight corrosion to ferrule x4 (1.1.12 (f) (i))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement x2 (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened x2 (1.1.14 (a) (ii))

Front Suspension arm corroded but not seriously weakened x2 (5.3.3 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement x2 rear bushes (5.3.4 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened x2 (1.1.14 (a) (ii))

Rear Suspension arm corroded but not seriously weakened x2 (5.3.3 (b) (i))

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Tyre slightly damaged/cracking or perishing x2 (5.2.3 (d) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake hose has slight corrosion to ferrule x4 (1.1.12 (f) (i))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement x2 (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened x2 (1.1.14 (a) (ii))

Front Suspension arm corroded but not seriously weakened x2 (5.3.3 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement x2 rear bushes (5.3.4 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened x2 (1.1.14 (a) (ii))

Rear Suspension arm corroded but not seriously weakened x2 (5.3.3 (b) (i))

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Tyre slightly damaged/cracking or perishing x2 (5.2.3 (d) (ii))

Offside Obligatory mirror deteriorated, but not seriously affecting the rear view (8.1.2a)

Brake pipe excessively corroded both front to rear (3.6.B.2c)

Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt both front (2.4.G.2)

Nearside Front Front constant velocity joint is insecure (2.5.C.1b)

Nearside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Seat belt anchorage prescribed area is severely distorted sill (5.2.6)

Offside Obligatory mirror deteriorated, but not seriously affecting the rear view (8.1.2a)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Brake pipe slightly corroded both rear to flexis (3.6.B.2c)

Glow plug light staying on

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Parking brake: efficiency below requirements (3.7.B.7)

Brake pipe slightly corroded both rear to flexis (3.6.B.2c)

Glow plug light staying on

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Side repeater incorrect colour (1.4.A.2f)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp not working on main beam (1.7.5a)

Offside Side repeater incorrect colour (1.4.A.2f)

Nearside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

All steel brake pipes on this vehicle have areas of slight corrosion

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Rear Exhaust system not adequately supported (7.1.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

nearside rear brake pipe corroding

offside front inner drive shaft gaiter split

Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

offside rear tyre wear on inner edge