MOT Status
ExpiredMileage
119,162 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pedal spongy
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Brake pedal spongy
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Central Engine mounting damaged but not to excess (6.1.8 (a) (i))
Coolant leak ()
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Tyre slightly damaged/cracking or perishing All four (5.2.3 (d) (ii))
Front Registration plate does not conform to the specified requirements (0.1 (d))
Fuel tank insecure Tank strap corroded/snapped (6.1.3 (a) (i))
Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Rear Registration plate does not conform to the specified requirements (0.1 (d))
Central Engine mounting damaged but not to excess (6.1.8 (a) (i))
Coolant leak ()
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Tyre slightly damaged/cracking or perishing All four (5.2.3 (d) (ii))
Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Fuel tank slightly loose Holding strap excessively corroded (6.1.3 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Tyre slightly damaged/cracking or perishing All four (5.2.3 (d) (ii))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Fuel tank slightly loose Holding strap excessively corroded (6.1.3 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Tyre slightly damaged/cracking or perishing All four (5.2.3 (d) (ii))
both front lower arm bush poor but no excessive movements
both headlight image on limit
both number plates poor
both rear to centre brake pipes corroded
rear subframe corroded
Brake load sensing valve stiff (1.1.17 (c) (ii))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Rear Upper Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock mounts (5.3.6 (a) (i))
Registration plate deteriorated but not likely to be misread (0.1 (b))
Brake load sensing valve stiff (1.1.17 (c) (ii))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Rear Upper Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock mounts (5.3.6 (a) (i))
Registration plate deteriorated but not likely to be misread (0.1 (b))
Brake load sensing valve stiff (1.1.17 (c) (i))
Rear Upper Brake pipe corroded, covered in grease or other material (1.1.11 (c))
underside components corroded
Brake load sensing valve stiff (1.1.17 (c) (i))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Rear Position lamp not working (4.2.1 (a))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Upper Brake pipe corroded, covered in grease or other material (1.1.11 (c))
underside components corroded
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Brake pipe slightly corroded lower front to rear (3.6.B.2c)
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)
Nearside Brake pipe slightly corroded hose to LSV (3.6.B.2c)
Rear Tyre worn close to the legal limit both (4.1.E.1)
Tyre worn close to the legal limit both front (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
both rear tyres perisded
offside rear tyre distorted
radiator fan noisy
Brake pipe slightly corroded lower front to rear (3.6.B.2c)
Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)
Nearside Brake pipe slightly corroded hose to LSV (3.6.B.2c)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Tyre worn close to the legal limit both (4.1.E.1)
Tyre worn close to the legal limit both front (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
both rear tyres perisded
offside rear tyre distorted
radiator fan noisy
both rear tyres perished
n/s/f tyre cut
Rear Brake pipe slightly corroded (3.6.B.2c)
Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Parking brake: efficiency below requirements (3.7.B.7)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Brake pipe slightly corroded (3.6.B.2c)
Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both rear tyres perished
n/s/f tyre cut
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too low and too far to the left. (1.8)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Brake load sensing valve linkage seized (3.6.E.3)
Front Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too high (1.8)
Nearside Stop lamp not working (1.2.1b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Long handbrake travel
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Front exhasut clamp missing a bolt, still fully supported
Long handbrake travel
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
light marking to windscreen
Indicator switch faulty (1.4.A.1)
Nearside Headlamp not working on main beam (1.7.5a)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Rear fog lamp not working (1.3.2b)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
light marking to windscreen
Centre Exhaust system not adequately supported (7.1.1)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Stop lamp not working (1.2.1b)
Offside Headlamp aim too high (1.8)
Offside Rear fog lamp not working (1.3.2b)
Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake load sensing valve linkage stiff (3.6.E.3)
front brake pads are getting low
Centre Rear fog lamp emits a light other than red (1.3.2e)
Centre Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance (1.3.2d)
Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Direction indicator not working (1.4.A.2c)
Nearside Registration plate lamp not working (1.1.5c)
Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Registration plate lamp not working (1.1.5c)
Parking brake lever has no reserve travel (3.1.6b)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
exhaust centre section damaged
front brake pads are getting low
scuffing to offside front tyre
slight smearing wiper blades
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BP02 ZDJ is a 2002 Peugeot 206 in Blue with a 1,124cc petrol engine. This vehicle has been through 33 MOT tests with a personal pass rate of 57.6%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BP02 ZDJ, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BP02 ZDJ?
You can check the full history of BP02 ZDJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BP02 ZDJ registered?
BP02 ZDJ is a 2002 Peugeot 206, first registered on 12 July 2002.
Is BP02 ZDJ safe to buy?
The MOT history for BP02 ZDJ shows 33 tests with a 57.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BP02 ZDJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BP02 ZDJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.