MOT Status
ExpiredMileage
140,755 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Oil leak
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Oil leak
Front Brake hose slightly deteriorated (3.6.B.4d)
Front Brake pad(s) wearing thin (3.5.1g)
Front Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake hose slightly deteriorated (3.6.B.4d)
slight movement in drivers seat base,not excessive at time of test
steering slightly stiff
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Front Side repeater missing (1.4.A.2b)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Direction indicator not working (1.4.A.2c)
Offside Front Headlamp aim too low (1.8)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Rear fog lamp not working (1.3.2b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Brake hose slightly deteriorated (3.6.B.4d)
Front Brake pad(s) wearing thin (3.5.1g)
Front Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake hose slightly deteriorated (3.6.B.4d)
slight movement in drivers seat base,not excessive at time of test
steering slightly stiff
Horn not working (1.6.2a)
Nearside Front Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)
Front Tyre worn close to the legal limit (4.1.E.1)
Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BP03 AAN is a 2003 Peugeot 206 in Black with a 1,997cc diesel engine. This vehicle has been through 11 MOT tests with a personal pass rate of 72.7%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BP03 AAN, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BP03 AAN?
You can check the full history of BP03 AAN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BP03 AAN registered?
BP03 AAN is a 2003 Peugeot 206, first registered on 20 June 2003.
Is BP03 AAN safe to buy?
The MOT history for BP03 AAN shows 11 tests with a 72.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BP03 AAN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BP03 AAN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.