MOT Status
ExpiredMileage
111,805 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Nearside Body has a sharp edge caused by corrosion around fuel filler (6.1.C.1)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too low (1.8)
Nearside Rear Suspension component mounting prescribed area is excessively corroded suspension mounting (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is excessively corroded suspension mounting (2.4.A.3)
Nearside Stop lamp not working (1.2.1b) DANGEROUS
Offside Stop lamp not working (1.2.1b) DANGEROUS
loud grinding noise from O/S rear brake
Very weakened by excessive corrosion , not safe to drive
Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis rail (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg (6.1.B.2)
Nearside Front Lower Suspension arm synthetic bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm 165/65/13 (4.1.E.1)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre has ply or cords exposed 165/65/13 (4.1.D.1b)
Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Rear position lamp(s) not working (1.1.A.3b)
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear fog lamp not working (1.3.2b)
Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
nearside front chassis corroded
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
nearside front chassis corroded
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
corrosion to rear coil springs
Offside Front Tyre worn close to the legal limit (4.1.E.1)
both front brake disc;s very thin
both rear tyres cracking
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
both front brake disc;s very thin
both rear tyres cracking
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BP03 LLF is a 2003 Ford Ka in Red with a 1,299cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 66.7%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BP03 LLF, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BP03 LLF?
You can check the full history of BP03 LLF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BP03 LLF registered?
BP03 LLF is a 2003 Ford Ka, first registered on 30 June 2003.
Is BP03 LLF safe to buy?
The MOT history for BP03 LLF shows 18 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BP03 LLF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BP03 LLF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.