MOT Status
ExpiredMileage
82,350 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Offside Front Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Rear Suspension component mounting prescribed area is excessively corroded inner and outer sills to arches (2.4.A.3)
Offside Rear Brake pipe leaking (3.6.A.1) DANGEROUS
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Rear coil spring corroded (2.4.C.1b)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Subframe mounting prescribed area is excessively corroded bracket (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer wheel arch (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded bracket (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded chassis inner wheel arch (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded centre outer sill (5.2.6)
Offside rear brake recording little or no effort (3.7.B.5a)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis under vehicle (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive under vehicle (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner wing (2.4.A.3)
Offside Rear coil spring corroded (2.4.C.1b)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner wing (2.4.A.3)
Offside Rear coil spring corroded (2.4.C.1b)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
o/s headlight mistted
vehicle showing signs of corrosion
Nearside Front Body has slight corrosion (6.1.B.2)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Body has slight corrosion (6.1.B.2)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Registration plate lamp not working (1.1.C.1d)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Body has slight corrosion (6.1.B.2)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Body has slight corrosion (6.1.B.2)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Lower Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear coil spring fractured (2.4.C.1a)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BP03 LRA is a 2003 Ford Ka in Red with a 1,299cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 66.7%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BP03 LRA, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BP03 LRA?
You can check the full history of BP03 LRA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BP03 LRA registered?
BP03 LRA is a 2003 Ford Ka, first registered on 11 July 2003.
Is BP03 LRA safe to buy?
The MOT history for BP03 LRA shows 18 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BP03 LRA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BP03 LRA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.