MOT Status
ExpiredMileage
122,149 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Nearside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm ball joint has slight play on limit (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill & floor (7.1.1 (a) (i))
Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Nearside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm ball joint has slight play on limit (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Lower Seat belt anchorage prescribed area is corroded but not considered excessive floor & chassis rails (5.2.6)
Offside Lower Seat belt anchorage prescribed area is corroded but not considered excessive floor & chassis rail (5.2.6)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Nearside Lower Seat belt anchorage prescribed area is corroded but not considered excessive floor & chassis rails (5.2.6)
Offside Lower Seat belt anchorage prescribed area is corroded but not considered excessive floor & chassis rail (5.2.6)
Engine warning light on
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)
Nearside Front Tyre worn close to the legal limit close to limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit ON LIMIT worn edges (4.1.E.1)
Oil leak ()
crack in windscreen but not affecting drivers view
Main beam 'tell-tale' not working (1.7.4c)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill to floor (5.2.6)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheel arch/outer sill (5.2.6)
Offside Rear Subframe mounting prescribed area is excessively corroded Chassis subframe mount (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Engine warning light on
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)
Nearside Front Tyre worn close to the legal limit close to limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit ON LIMIT worn edges (4.1.E.1)
Oil leak ()
crack in windscreen but not affecting drivers view
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Outer Rear Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Lower Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)
Nearside Front Upper Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Lower Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)
Offside Front Upper Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front coil spring incomplete (2.4.C.1a)
Offside Rear Rear position lamp(s) not working (1.1.A.3b)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside outer track rod end joint cover split/missing
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear coil spring cracked (2.4.C.1a)
Nearside outer track rod end joint cover split/missing
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside brake disc slightly scored (3.5.1h)
Offside brake disc slightly scored (3.5.1h)
n/s/f lower arm bush bonding seperating
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BP03 NUH is a 2003 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 57.1%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BP03 NUH, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BP03 NUH?
You can check the full history of BP03 NUH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BP03 NUH registered?
BP03 NUH is a 2003 Ford Ka, first registered on 28 August 2003.
Is BP03 NUH safe to buy?
The MOT history for BP03 NUH shows 21 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BP03 NUH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BP03 NUH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.