MOT Status
ExpiredMileage
68,343 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Stop lamp not working (1.2.1b)
Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Headlamp aim too low (1.8)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside rear brake recording little or no effort (3.7.B.5a)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside rear brake recording little or no effort (3.7.B.5a)
Both front brake disc's worn
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim too low (1.8)
Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake lever has little reserve travel (3.1.6b)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Road wheel slightly damaged (4.2.A.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front front brake grabbing slightly (3.7.A.2b)
front discs worn
rear axle bushes worn
slight damage to nearside front tyre
Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Seat belt locking mechanism does not secure or release (5.2.5a)
Nearside Rear coil spring cracked (2.4.C.1a)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear coil spring cracked (2.4.C.1a)
Registration plate lamp not working (1.1.5c)
Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front registration plate deteriorated (6.3.1d)
Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Registration plate lamp not working (1.1.5c)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Stop lamp not working (1.2.1b)
Rear registration plate deteriorated (6.3.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BP03 PLJ is a 2003 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 11 MOT tests with a personal pass rate of 54.5%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BP03 PLJ, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BP03 PLJ?
You can check the full history of BP03 PLJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BP03 PLJ registered?
BP03 PLJ is a 2003 Ford Ka, first registered on 30 June 2003.
Is BP03 PLJ safe to buy?
The MOT history for BP03 PLJ shows 11 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BP03 PLJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BP03 PLJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.